Is the filter system of this Cordless Smart Vacuum Cleaner easy to disassemble and clean to maintain its long-term high-efficiency filtering performance?

The filter system of this Cordless Smart Vacuum Cleaner is relatively easy to disassemble and clean to maintain its long-term high-efficiency filtering performance. Before cleaning, users need to make sure that the device is turned off and unplugged. This is to avoid accidentally starting the device during disassembly and cleaning, thereby ensuring the safety of users. Finding the filter location is the first step in disassembly. Depending on the model, the filter is usually located at the bottom of the dust cup or the top of the vacuum cleaner. Users need to carefully check the product manual or device structure to determine the specific location. Afterwards, users can carefully rotate the filter and pull it out. During the operation, avoid excessive force to avoid damaging the filter or other parts inside the vacuum cleaner.
Users can use a clean rag to gently pat the filter to remove dust and particles on the surface, which can reduce the difficulty of subsequent cleaning. Next, put the filter in warm water, add an appropriate amount of neutral detergent, gently stir the water to evenly distribute the detergent, and then let the filter soak in water for 5-10 minutes. It should be noted that hot water or strong corrosive detergents should not be used to avoid damaging the filter material, affecting its filtering effect and service life.
After soaking, use a soft brush or an old toothbrush to gently scrub the surface and gaps of the filter to remove stubborn dust and stains. Avoid using hard objects or metal brushes during scrubbing to avoid scratching the filter and causing a decrease in filtering performance. After scrubbing, rinse the filter in clean water to ensure that there is no residual detergent. You can rinse it with running water until the filter surface is clean.
After cleaning, place the filter in a cool and ventilated place to dry naturally, avoiding direct sunlight. It takes at least 24 hours to dry and ensure that the filter is completely dry before installing it back into the vacuum cleaner. This is to prevent mold growth and ensure the hygiene and use effect of the filter. After ensuring that the filter is completely dry, the user can rotate it into place and install it back into the vacuum cleaner in the reverse steps of disassembly to complete the reinstallation of the filter.
In order to maintain the efficient performance of the filtration system, users also need to pay attention to some maintenance suggestions. Depending on the frequency of use and the cleanliness of the home environment, it is recommended to clean the filter once a month. If there are pets or a lot of dust in the home, the cleaning frequency can be increased appropriately. In addition, if the suction power of the vacuum cleaner is significantly weakened, or there is still a lot of dust on the filter after multiple cleanings and it is difficult to clean it thoroughly, you may need to consider replacing the filter to ensure that the vacuum cleaner can always maintain a good cleaning effect.