How to inspect and clean the roller brush and suction head of the Cordless Smart Vacuum Cleaner?

Inspecting and cleaning the Cordless Smart Vacuum Cleaner's brush roller and suction head are important steps in maintaining your vacuum cleaner's performance. Here are some suggestions and steps to help you do this:
1. Check and clean the roller brush:
Turn off the vacuum cleaner: Make sure the vacuum cleaner is completely turned off and disconnect the power or charging cord to prevent accidental starting.
Removing the roller brush: Depending on the design of your vacuum cleaner, it may be necessary to remove the roller brush for a thorough cleaning. Typically, roller brushes can be removed by turning or pressing a specific release button. Consult your vacuum cleaner's owner's manual for specific disassembly steps.
Remove hair and fibers: Use scissors or a specialized cleaning tool to carefully cut or pull out the hair and fibers that are wrapped around the roller brush. Avoid using sharp objects that may damage the roller brush or vacuum cleaner.
Clean the surface of the roller brush: Use a soft brush or damp cloth to gently wipe the surface of the roller brush to remove dust and dirt. If there are stubborn stains on the roller brush, you can use dilute neutral detergent to clean it, but please make sure that the cleaner will not damage the material of the roller brush.
Reinstall the roller brush: After cleaning is complete, reinstall the roller brush onto the vacuum cleaner, making sure it is seated correctly and spins smoothly.
2. Check and clean the suction head:
Removing the suction head: Depending on the design of your vacuum cleaner, it may be necessary to remove the suction head from the vacuum cleaner for cleaning. This usually involves turning or pressing a release button. Please follow the instructions in the user manual.
Clear blockages: Check whether there are blockages inside the suction head, such as large particles of dust, hair or other debris. Use a tool, such as a small brush or pliers, to carefully remove these clogs.
Clean the nozzle surface: Use a damp cloth or paper towel to wipe the nozzle surface to remove accumulated dust and dirt.
Reinstall the nozzle: After cleaning, reattach the nozzle to the vacuum cleaner, making sure it is secure and in the correct position.
However, it is important to note that different brands and models of Cordless Smart Vacuum Cleaner may have different cleaning and maintenance requirements. Therefore, be sure to consult your vacuum cleaner's user manual and follow the manufacturer's instructions and recommendations before performing any cleaning operations. In addition, regular inspection and cleaning of the brush roller and suction head can help maintain the performance of the vacuum cleaner and extend its life.